Need Help Please!!

[wfa]

I have a 98 vw beetle. 2.0 liter gas engine. We have replaced the water pump and timing belt, ended up having head rebuilt. We are ready to put everything back together now. We are having a problem with the torque sequence and how to torque the cylinder head bolts. We are not sure about how tight they need to be. Any help would be appreciated...

[Skoobahead]

Use new stretch bolts. Torque center first (fwd and aft) then criss cross the remaining 8 bolts moving outboard from center. Tighten in 3 stages.
Stage 1-30 ft-lb
Stage 2-additional 90 degrees
Stage 3-additional 90 degrees