Tool for removing protective pan?

[flybeetle]

I attempted to change my own oil today on my 2006 NBC and found there are 6 bolts on the pan protecting the engine that have a 12-pointed star instead of the 6-pointed torx. The diameter of the hole in the bolt is approximately 6.5 mm. Where can I get the proper bit to remove those bolts?
Thanx

[hannaco]

Harbor Freight usually has the needed bit.

[flybeetle]

Thanks for the info on Harbor Freight. Unfortunately, they don't seem to carry it any longer. I did find a set of 12-point bits on ToolKing.com

[The Cheat]

they're triple square bits, i believe they're 8mm.

[Porkchop]

This is where I got mine:

http://www.mytoolstore.com/sk/sk03093.html

Might want to order the set - the bigger ones are used to remove the axles.

If they are 8mm, that's the same size for air-cooled VW axles and can be gotten at any of the air-cooled parts places like:

http://www.chircoestore.com/catalog/...ee05aa66d30e7c

(but those are going to be crappy "chrome vandium" chinese stuff. I'd spend the money on SK.