NewBeetle.org Forums - View Single Post - Vag Com - Sharing Thread
View Single Post
  #1 (permalink)  
Old 09-25-2005, 03:34 PM
marvins_dad's Avatar
marvins_dadRegistered Member marvins_dad is offline
I BELIEVE!
 
Join Date: Sep 2005
Location:
Dallas, TX, USA
Car: 2002 DIYCGCC TDI
Default Vag Com - Sharing Thread

I would like to thank the following members that are willing to help out fellow members with their Vag Com....

AR

MotorsportsAuthority
Conway, Arkansas
I'm the sales manager at a performance shop in Conway, Arkansas.
I'm willing to give free scans to any one who needs them.
I can also Tune With LemmiWinks software to tune your Bug.
We utilize an All Wheel Drive dyno and i will cut members a 10% break on the 3 dyno run price.
Also we tune any and every EFI Standalone (including Volkswagen LemmiWinks) for a discounted 200.oo an hour.
We recently pulled an additional 27.9 hoursepower out of my bug VIA lemmiwinks..

Duffy
Jonesboro, Arkasas

AZ
olive
Tucson, AZ

I have a Hex-USB+CAN cable and a laptop that I'm willing to use to help others. I'm located in SE Tucson. During the week, I'm willing to meet/help but I keep an early schedule (I'm a school teacher). Folks can PM me here. -- Sherry

CA
Blue Thunder
San Marcos Ca (North San Diego County)
Orange, Riverside and San Diego County welcome
VAGCOM and Laptop

58and03beetles
San Diego, CA
have theUSB Hex-can+Bus

CT
The Cheat
i have:
the cable
laptop
buncha nb-related tech stuff on my lappy

located:
southbury ct (06488)

willing to travel:
sure...i can do scans within 50 miles either before/after work (usually, but not always i have mon/weds nights free and saturday off). best bet is to pm me and we'll set something up. if i have the day off, i'll go wherever.

fees:
all services free to mods and sponsors
non-sponsors get free code reading/clearing, but if i have to do coding (ie: adding a phatbox to a non-cd changer equipped car or recoding a control module because different seats were installed), it's $20, and $5 goes to the website to keep it up.

i'm also available for routine maintenance as well (tuneups, MAF replacements, oil changes). again, pm me and we'll set something up. i can also do custom audio installations, as well as install most anything else as long as i have a day or two free.

FL
Deserion
Jacksonville, Fl
HEX-USB+CAN with a laptop.


GA
Porkchop
Cartersville, GA (metro Atlanta area)
Can be reached via PM on here.
I have a hectic schedule with work and school so you'll have to come to me.

oneighturbo
Corey
Decatur, GA (Atlanta)
to contact: IM, PM, email

MA
Palmettoguy
Boston, MA
I have a KII-USB Vag-Com Cable and laptop.
Wont charge to read/reset codes.
Send a PM to get in contact.

MS
noR
Jackson, MS
I've got a KEY-USB cable.

NE
Yurko
Omaha, NE
What I have: VAG-COM, laptop, bentley manual


NC
kcfoxie
Durham, NC

NH
turbomonkey@
Manchester, NH

NY
HudsonValleyVDub
Dutchess Co. NY
I'm in Dutchess Co. NY and have the Geniscan GS200 VW/Audo code reader and thought I could help those in my area if you could maybe add me to this list. This is not a tuner but it does read/clear DTCs of engine, transmission, ABS system and Airbag systems

OH
Growler/Aaron
Columbus, OH
PM is best or (growlertdi at gmail dot com)

OK
[/B]SixChuter
I have Vag-Com now. I'm not real knowledgeable yet about all the uses for it but I can do the basic scans.

OR
whitedog
Bend, Or
HEX+CAN

PA
Pelican18TQA4
Ivyland, PA (Philadelphia area)
latest Bentley CD (includes '05 NB/NBC) and the latest VAG-COM cable (can be used with MkV vehicles and the B6 Passat)

pdoel
Pittsburgh, PA
vagcom, laptop, Bentley CD

TechnoTrix'd
(S.E. PA, S.W. NJ, N. DE)
Licensed Vag Com, Older Bently Manual on CD, Wireless Laptop
Send me a pm or zap me an e-mail. Weekends are good if I need to travel or if local to Brookhaven, evening might work.

SC
sullyTDI
North Augusta, SC
PM me here.

TN
zipster
Southern Middle Tennessee
Vag Com

D2Beetle
Springfield
fully licensed VAG-COM

TX
Bugmonkey
Alpine, TX
Vag-Com, Laptop, '05 Bentley CD

mgwerks
Bandera, TX, NW of San Antonio

marvins_dad
Dallas, TX
Vag-Com, Laptop
Let me know ahead of time and I will bring the setup to any DFW New Beetle Club meeting

NBTurboFreak
Houston, TX to Groves, TX or within 2 hours of Houston.
HEX-USB+CAN cable for ODBII and OBDI adapter
LAPTOP with latest VAG-COM installed
Bently CD for 98-02 New Beetle
Bently Book for 98-02 New Beetle

v-dubed
Rockwall, Texas
Vag

Mexico
Pulgamovil
Juan Carlos
Mexico City
VAG COM with Laptop
Bentley Manuals

Here are a couple guides v-dubed pointed me to...
Lemmiwinks: The guide [Archived]
How I tweaked my AF with Lemmiwinks [Archived]
VAG-COM information - detailed block rundown (VWFIXX)

Another resource that mgwerks pointed us to for Vag-Com Users List via the TDIClub...
http://www20.brinkster.com/beowulf9/tdi/vagcom/
and another....
http://www.steve-hall.com/cgi-bin/VAG-Locator.pl

sullyTDI sent me this site as well....
http://www.vagtoolfinder.com/


If you are on this list and at any time want to be removed/updated - please email me or one of the other moderators of this forum and we will remove or update your information.
__________________
marvins_dad ~ antoine
Check out Marvin's Website!!! | Beetle Pic Thread | Personal Pic Thread | DFW New Beetle Club Forums | Farewell TJ - Missed!

Last edited by marvins_dad; 02-23-2011 at 03:33 AM..
Reply With Quote