heres a few pics i took on the phone thru-out the build.
i suggest doing your own measuring..i actually used a hammer to bang out a few spots in the well to make it level for the box...it didnt take much. and i know some people cringe about it.
anyways. built the box from 3/4 inch mdf. and then coated the interior with resin. this box is almost exactly 1.5 cubes. it is a common air box...which i didnt want to do. how ever the alternative was building a taller box..which would have raised the false floor at least another inch and a half.
depending on the subs you want to you use you may be able to build a smaller box. or seperate it to two chambers.
either way the box sounds great. i am going to be dynamatting a good portion of the vehicle. so i am waiting until after that is done to finish the top of the floor. eventually a piece of mdf will be cut out around the amps and carpeted section of the subs. i will carpet it and it will cover up the wiring and distribution block and capacitor..which is installed in the driver corner of the bumper.
either way...enjoy the pics. hope it gives you some inspiration. if you could only hear it. haha
|