Step Five
Use both LEDs
Pass wires thru the hole and either use a hot glue gun to firmly secure the LEDs in the bud vase or simply leave them loose.
I used the hot glue gun but once I finished realized it is unnessesary to secure them as they do not really move around.
I DID NOT DRILL A HOLE IN THE BUD VASE.
others recommend putting the LEDs directly inside the Bud vase but this method does not require you to do that and still lights up the vase perfectly.
Step six
Wrap the loose wires with electrical tape to make them easier to pass thru the dash board and to keep the wires from tangeling.
__________________
■■■■■■■■■■■■
|