Quote:
Originally Posted by LuvBug122593
Ok here some pictures of the rocker panel that I need to fix.
 |
I have the same previous damadge on the otherside....My Plan 1. grind off paint in damadged area 2.weld some coat hanger pieces on all along the damadged area.3.Use a slidebar hammer attached to welded coat hanger to pull the dented area out.4. When you feel you've pulled it out enough remove coat hanger pieces.5.hammer down high stops lightly !!! 6. Grind down high spots 7.smooth on a thin layer of body fill.8 sand and repeat until smooth.9.Prime sand and paint.. Hope this helps....