Now, you can re-install the needles AT THEIR "0" RESTING PLACES (with your fingers) until they are about a quarter of an inch from the SEATED faceplate - do not push them too close to the faceplate or the needles will rub. The Cover is now re-inserted in the two tabs, at the top. and lowered over the odometer button and snapped into place with the two tabs at the bottom. Replace the two spring clips, seat cluster and replace the two Torx screws. Replace the cluster trim piece. Your electro-luminescent faceplate manufacturer will provide you with wiring instructions for the faceplate lighting.
You are now completed and ready to light your interior in a new way! (Picture below also features the available electro-luminescent gauges in an Autometer pod).
|