putting in the code

[MOONDOG316]

i have a radio ? i put in a new battery now the radio is in safe mode i put in the code 2 times ( of course i had the wrong code from the old radio ) but now it says safe and a # 2 on the right side now it has been over a day and has not reset whats my next move to get it to work just disconnect the battery and start over or is there a trick

[juston]

i had this problem, called the vw dealership and just fixed it today.

1. make sure car is off
2. turn key to 'on' and have radio on
3. wait for an hour and it will be cleared out

[MOONDOG316]

Wont The Fuel Pump Run While Thst Doing That Is That The Only Way To Do It Or Is That All They Told U Thanks

[juston]

no you dont have to turn it all the way to the 'on' position, just to turn the accesory electronics on. according to both tha manual and dealership its the only way. dont worry i did it 4 times yesterday with no problem.

[Shantae516]

I know this is an old thread, but I just got my NB today and my radio is stuck in safe as in the 1000 wont show up. So I am following these instructions hoping it works. I turned the key one click (2 clicks makes all the dash lights come on) is this right? Thanks in advance

[The NEW Ringo]

You only have to leave the key in the ignition for an hour it can be in the off position so not to run anything else the radio must be on though. It will stay on as long as the key is in the ignition.

I too have a safe mode problem. I got the code from my dealer and it still dosnt work? I dont know what to do now?

[Bickel]

I think you should try four times zero perhaps they can be open.

Thanks for share with me!

[Ruby]

Actually guy when you start first time so you just change setting and remove security system then they will work without code system . I hope you got it how to remove code.