FS: Polyurethane Jack Pad for your floor jack

[turbomonkey@]

I've decided to change the way I make these available on the forums and will now just carry a small inventory of these and make them available throughout the year. This way I can ship the pad out the next business day in most cases. Quicker turnaround for you. I have been making these for a couple of years now with a great track record.

For those not familiar...



The pad fits onto your floor jack and allows you to jack your car up at the pinch weld (like you do with the stock scissor jack) without damaging the pinch weld. Will work on any VW/Audi and probably on other cars as well but its only been tested on VAG cars.

Polyurethane Jack Pad Order Page



$2 for each pad sold is going to go to Vikki (luvinmyb5.5 on www.b5one.com) to help with her fight against cancer.

Originally Posted by NH VW Junky

Proud owner here - this is a must have item.

Originally Posted by 1.8Tabamoura

sweet adition to any floor jack...

Originally Posted by PassatVariantPunk

They are necessary. Get one if you aint got one.

[r0nd3L]

I'm definately getting one of those, or maybe two.

I'm at school now, so I can't PayPal you know. When I come back at 3:00 I'll send you a payment.

This is just the thing I was looking for. Even when I had my Taurus SHO the jacks were pain the *** since they never fit in the jack-spot.

Matas

[turbomonkey@]

Glad to hear it.

I decided to start making these when I chewed up my own pinch rail trying to use my race jack in that spot because I couldn't get it under the car to reach a better lifting point.

I checked a couple of places like JC Whitney and all they had were plastic ones and working in the plastics/urethane industry, I wasn't convinced that ABS plastic would hold up in the long run.

I've sold hundreds of these now either direct or through the distributor and everyone has been really happy with them.

[r0nd3L]

Payment sent. Do you know when can I expect to get these?

As I understood, you still have to make those, right?

[turbomonkey@]

These are going to be cast on Monday and I should have them ready to ship before the end of the week (they need to post cure a day or two). I'll be shipping out USPS Priority Mail. If I have any delay, I will be sure to let folks know but since I've done these so many times now, I don't anticipate any delay at all. I'm only making a short run so the total casting process should only be one day, a day or two to post cure and then 2-3 days in transit before it hits your door.

[squeebug]

Do these just sit on the jack or do they have to be attached in some way?

[FineExampl]

I just got a secondhand sears floorjack. I think i will want one as well.

Are we sure this will work with the NB? I'm not familiar with some of this stuff.

[Toad]

I am also interested in acquiring one of these. where do we sign up?

[turbomonkey@]

Originally Posted by squeebug

Do these just sit on the jack or do they have to be attached in some way?

Because I have a flat pad, it just sits on my jack like in the pictures at the top. If you have a jack like the ones from Sears, they sit inside the cup with a press fit. No mechanical means of fastening required.

[turbomonkey@]

Originally Posted by FineExampl

I just got a secondhand sears floorjack. I think i will want one as well.

Are we sure this will work with the NB? I'm not familiar with some of this stuff.

I've not tried one specifically on the NB but I'd assume they would as they work on Passats, A4s, Jettas, Golfs and GTIs. I can't imagine the NB pinch weld is radically different.

[turbomonkey@]

Originally Posted by Toad

I am also interested in acquiring one of these. where do we sign up?

I take paypal at michael.egan@comcast.net Be sure to include a postal address as I'll be shipping them USPS Priority Mail

[warren]

count me in. payment sent.

[Toad]

payment sent.

[STDave]

Count me in. Payment sent.

[turbomonkey@]

I have received paypal from the following folks:

Michael K. (paid)
David H. (paid)
Jose P. (paid)
Warren G. (paid)
Ceasar C. (paid)
Matas N. (paid)
Brian K. (paid)
Geoff Y. (pending)
Jason B. (paid)

I still have some of these left that are unaccounted for - the lot run is 20 pcs. so I still have 9 left (I'm holding two pending payments today). The order is the cast dept., and they will be casting the parts today or tomorrow which should allow me to ship before the end of the week.

Mike

[slugo]

Count me in. Payment sent.

[turbomonkey@]

5 left.

Michael K. (paid)
David H. (paid)
Jose P. (paid)
Warren G. (paid)
Ceasar C. (paid)
Matas N. (paid)
Brian K. (paid)
Geoff Y. (pending)
Jason B. (paid)
Rich B. (paid)
Jeff W. (paid)
Steven B. (paid)
William H. (paid)
Erik H. (pending)
Matt M. (holding one)

[GLUVBUG]

Mike:

Sign me up! Payment sent via Paypal

Jeff

[turbomonkey@]

ONLY 4 LEFT

Michael K. (paid)
David H. (paid)
Jose P. (paid)
Warren G. (paid)
Ceasar C. (paid)
Matas N. (paid)
Brian K. (paid)
Geoff Y. (pending)
Jason B. (paid)
Rich B. (paid)
Jeff W. (paid)
Steven B. (paid)
William H. (paid)
Erik H. (pending)
Matt M. (paid)
Marcus R. (paid)

[roamerr]

I'll take one -- Paypal sent.

roamerr
Randy R.