moon hubcaps on stock 16" wheel

[tiksbug]

hello everyone
wanted to if you can put moon hubcaps on the stock steel wheels and if there is how would you go about it

thanks for any answers

2001 red beetle GLS

[huck731]

are you talking about onld vw hubcaps? I have pictures on how to do it. I'll try to find them.

[huck731]

[huck731]

first off, I made a stand off to put under the rivet so it would mushroom out. what I did was find the center of the wheel and then I measured the inner diameter of the hubcap. after that you evenly space out 5 marks for the rivets on the wheel within the diameter of the hubcap. I drew a circle in pencil to mark the diameter and then I drew circles to mark the rivite/clip positions. you then drill out the holes. I started with a smaller drill bit to get the hole started and then I drilled it out. I bought the rivit adn clips off of wolfsburgwest along with teh rivet tool. I think I got the hubcaps from ebay. I'm sure this process should work for any clip on style hubcap like that.