Blown Euroz: 3rd Annual GTG

[bugasm99]

The location and date have finally been set for the 3rd Annual Blown Euroz GTG. This year we have a new location to allow even more cars with more room to spread out. This has been a great event the past two years and we look forward to continuing on for many more years.

Date: Sunday, March 30th
Location: The old I-95 Marketplace in Bucks County
Time: 10am-3pm

Sponsors:

BlownEuroz
F.M.S. (Force-Motorsports)
USRT (Thanks to Josh and Rob)
AWE Tuning
Holberts Porsche & Audi
TM Tuning



Directions from Philadelphia, South Jersey, Delaware:

I-95 North to Exit 44 (Business Rt.1 Penndel Levittown)
At top of Exit ramp bare right.
At very first light make a right onto Rt.413 South
At very next light (it might be a blinking light) about a ¼ mile down make a right into the parking lot. Located in the University of Phoenix parking lot.

Directions from Burlington, NJ, Bristol, PA:

Burlington-Bristol Bridge to Rt. 413 North Follow for about 4 miles and make a left into parking lot.

Or Burlington-Bristol Bridge to Rt. 413 North to I-95 North to Exit 44 (Business Rt.1 Penndel Levittown)
At top of Exit ramp bare right.
At very first light make a right onto Rt.413 South
At very next light (it might be a blinking light) about a ¼ mile down make a right into the parking lot. Located in the University of Phoenix parking lot.

Directions from New Hope, Rider University area, Flemington, NJ:

I-95 South to Exit 44 (Business Rt.1 Penndel Levittown)
At top of Exit ramp make a left at the light.
At second light (two lights immediately after making left) make a right onto Rt.413 South
At very next light (it might be a blinking light) about a ¼ mile down make a right into the parking lot. Located in the University of Phoenix parking lot.

Directions from Trenton, New York City, and Northeastern states:

New Jersey Turnpike to Exit 7A I-195 Trenton Hamilton
Take I-195 South to Rt29 North (toward Trenton Thunder Stadium) to Rt.1 South (Toll Booth $1)
Follow to I-95 South to Exit 44 (Business Rt.1 Penndel Levittown)
At top of Exit ramp make a left at the light.
At second light (two lights immediately after making left) make a right onto Rt.413 South
At very next light (it might be a blinking light) about a ¼ mile down make a right into the parking lot. Located in the University of Phoenix parking lot.

Directions from Reading, Lancaster, CEPA (Central PA):

PA Turnpike to Exit 351 Philadelphia
Take Rt.1 North to Rt.213 Maple Ave exit
(Go slow at the exit it’s an EXTREMELY sharp turn)
At bottom of exit ramp make a left and then an immediate Right onto South Flowers Mill Rd.
At first light continue straight onto Rt413 South
Next light (it might be a blinking light) about a ¼ mile down make a right into the parking lot. Located in the University of Phoenix parking lot.

[TechnoTrix'd]

Very cool Josh, great to see that USRT will be involved.

Come on peeps, let's get some pods to this event.

Check out last years pics to see some of the great cars that were there: 2nd Annual Blown Euroz GTG :: March 25th Pics

[GINA]

Toss me down as a maybe

[Pelican18TQA4]

I'll be there

[DubQueen]

Originally Posted by Pelican18TQA4

I'll be there

Me 2!

[CA Solt]

I will say a strong maybe.
I also have buddy who has a sleeper Mk IV GTI,
and I'll try to coax him along too.

(thanks Rob)

[TechnoTrix'd]

Excellent! Glad to see the responses, thanks everyone..

[VW Lady Bug]

We'll have 2 cars that are almost definite - mine and my stepdads. May have some other cars, but definitely additional spectators!

[bugasm99]

I look forward to seeing everyone there. Keep spreading the word.

[missruby]

Definite maybe here

[bugasm99]

[bugasm99]

USRT Specials for the Blown Euroz GTG ... March 30th

$50 off any Unitronic Software

USRT is pleased to announce that we will be running discounted pricing on all Unitronic software flashes for everyone attending the Blown Euroz GTG, March 30th in Levittown, PA. USRT will be offering a flat discount of $50.00 off any Unitronic software flash, no matter what the application or stage level you choose. This will be honored for all software flashes performed the day of the show and you must be present to receive the discount.

For those who are not familiar with Unitronic, they are a Canadian based tuning firm who specializes in custom flash based software for VW and Audi applications. Unitronic is renowned for their Big Turbo and custom turbo applications as well as other software which reaches beyond the norm of software upgrades.

Please visit www.unitronic.ca for more details on Unitronic Software and availabe applications.

------------------------------

50% OFF installation of Snow Performance water/ meth kits and Eurojet Racing products*

USRT will also be offering half price installs on any Snow Performance water/ meth kits or Eurojet Racing products purchased the day of the GTG. Simply purchase/ order the parts on the day of the GTG and schedule an install date for half price installation. This is perfect for anyone who has been looking for the added performance of Eurojet products and safety of water/ meth injection, but doesn't have the ability (or time) to install and set-up the parts.

Please visit our site Here! for more information on Snow Performance kits and the benefits to your turbocharged or supercharged VW/ Audi.



* all products must be purchased and/ or paid for at the gtg in order to receive the discounted price/ install.

[CA Solt]

How about a discount on the intake manifold???

[bugasm99]

Sure, were actually giving them away ...

unfortunately they are all sold out and we will not be manufacturing the previous manifolds again. We are working on making a modular manifold/ ITB set-up that will allow you to upgrade from the SRI manifold to ITB's if you choose so without purchasing a whole new set-up. We are currently working on fitment testing.

[CA Solt]

Originally Posted by bugasm99

Sure, were actually giving them away ...

unfortunately they are all sold out and we will not be manufacturing the previous manifolds again. We are working on making a modular manifold/ ITB set-up that will allow you to upgrade from the SRI manifold to ITB's if you choose so without purchasing a whole new set-up. We are currently working on fitment testing.

HA! Just tell me these new models will fit under the NB hood!

[bugasm99]

we will be test fitting the 2.0 on my car and the 1.8T's on another local car in the near future.

[TechnoTrix'd]

Originally Posted by CA Solt

How about a discount on the intake manifold???

The way this things are selling, I'm just hoping they don't raise the price a $100.00....

Late to the party on these myself. If I had found them 2-3 months ago, there would be one on the bug right now (and maybe a slight bump in my hood...).

Hope you and your friend with the MKiV GTI can make it on the 30tht. That would be very cool..

[CA Solt]

Originally Posted by TechnoTrix'd

The way this things are selling, I'm just hoping they don't raise the price a $100.00....

Late to the party on these myself. If I had found them 2-3 months ago, there would be one on the bug right now (and maybe a slight bump in my hood...).

Hope you and your friend with the MKiV GTI can make it on the 30tht. That would be very cool..

I've been eyeballing these for over a year, and purposely did not purchase one primarily due to fitment issues, and the fact that communications with USRT had informed me that the new mani was in development, and would fit the NB...so I do have expectations.

But don't be putting the jinx on the pricing by saying they'll jack it by a G-spot.

[TechnoTrix'd]

Originally Posted by bugasm99

USRT Specials for the Blown Euroz GTG ... March 30th

$50 off any Unitronic Software

USRT is pleased to announce that we will be running discounted pricing on all Unitronic software flashes for everyone attending the Blown Euroz GTG, March 30th in Levittown, PA. USRT will be offering a flat discount of $50.00 off any Unitronic software flash, no matter what the application or stage level you choose. This will be honored for all software flashes performed the day of the show and you must be present to receive the discount.

...snip...

Hey Josh,

What is the retail price for the Unitronic software? On the USRT site it just states "call for pricing", whereas the Revo base program is $499.00.

Thanks.........Rob...

BTW, no need to share my joke with USRT, don't want to be responsible for any price fluctuation with the new Intakes...

[bugasm99]

BTW, no need to share my joke with USRT, don't want to be responsible for any price fluctuation with the new Intakes

Don't worry, I won't share. The pricing will reflect the new hardware anyway and will only be different based on the cost to fabricate the new manifolds, not the history of the previous manifolds.

As for fitment, are main goal, and part of the hold up, is developing a manifold that is uniform across the board. This will kill fabrication costs down and make it easier for us to distribute the manifolds. This includes beetles and I plan to make sure they work as should be the test bed for the turbo ITB applications.